You can use the plastic spudger to press the adhesive on. Make sure the frame sticker is positioned evenly and press it on. Position the frame sticker carefully on one edge of the frame and attach it gradually.Remove the first protective film layer of the frame sticker.To make sure that the new frame sticker will really stick, remove all glue residue and dirt from the metal frame.The iPhone Xr is built very similar and is re-glued in the same way. Heat the outer edge of the frame several times if necessary. Rest the display on a stable object to avoid straining the sensitive flex cables. Then you can fold the display over to the side. Now use the pick to push up the display so the tabs disengage from the steel frame.Don’t stick the pick in too far on the side where the Sleep/Wake button is because that could damage the display flex cables. Because the display’s glued on, you have to slide the pick all around the iPhone between the aluminum frame and the display frame.If you are using an iFlex, switch to a plastic pick as soon as possible to avoid scratching the frame. While lifting the screen with the suction cup, insert the hard plastic pick between the frame and the display and press down the frame.ĭo not insert your tool more than 5 mm into the gap, so you don't damage small parts inside the iPhone. Place the suction cup at the bottom of the display. Use a heat gun to heat the outer edges of the display to about 60☌ (140☏). If the screen is severely cracked, cover all of it with packing tape before you continue.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |